OpenServo.com

viper911 · Joined: 14 Mar 2006 Posts: 2 Location: uk

Does anyone know what i need to control a servo (futaba s3003) by the flick of a switch. I want to be able to flick a switch and it turns 90degrees
and when i switch it off it goes back to its start position. It needs to a
use 12volt car battery.A small circuit board would be ideal. Do you have
any ideas that may help me or does anyone make such a thing as i have no idea about these things

andylippitt · Posted: Tue Mar 14, 2006 5:55 pm Post subject:

Hi there. This forum is for a servos that we are replacing the internals of primarily for the purpose of robotics. The control interface we use isquite different from those of standard servos. I think that if you asked over at http://lynxmotion.net, you'll find lots of people willing to help.

viper911 · Joined: 14 Mar 2006 Posts: 2 Location: uk

thanks for the help i will have a look