OpenServo.com

seecheon · Joined: 10 Mar 2006 Posts: 2

The following links are from Robo-one's robot builder in Japan (scroll and check out their servo modification, realy pro!):
http://riosia.cocolog-nifty.com/weblog/2005/11/index.html
http://www.geocities.jp/mimiin/

There are more modification some where else, could reach from:
www.robo-one.com

Low cost servo good for modification, I'm trying to see what I can do with this now:
http://www.ministudio.co.jp

Also...
- Kondo ICS red version servo
http://robosavvy.com/Support/images/krsmanual_e.pdf

seecheon · Joined: 10 Mar 2006 Posts: 2

Some how related...
http://www-bsac.eecs.berkeley.edu/projects/cotsbots/downloads/MotorBoardSchematic.pdf

I have checked the Ministudio RB995 servo using NDS8858H Mosfet SO8.

mpthompson · Joined: 02 Jan 2006 Posts: 650 Location: San Carlos, CA

Wow! Thanks for passing these along. I really like looking over the PCB design on: http://www.geocities.jp/mimiin/ It will certainly inspire me to redouble my efforts on a good PCB design for the new OpenServo.

Lot's of useful information to look over. I'll be looking over the MOSFET selection as well. Perhaps we can contact the developers of the boards and find out what drove their choice for the MOSFETs.

-Mike