OpenServo.com

[ginge]

Hi all. I have confirmed that this programmer will work with the V2 openservo.

Kanda STK200

I also managed to make my own cheap STK200 using only 4 components
http://elm-chan.org/works/avrx/stk200.png
Both buffered and unbuffered designs work.

I programmed it using AVRDUDE in the latest winavr.

The latest WinAVR doesn't have the Atmega168 in there, so you will have to copy/paste the code from this URL into avrdude.conf

http://www.mail-archive.com/avrdude-dev@nongnu.org/msg00411.html

Hope this helps.

Barry

[BasicFox]

I used the ponyprog programmer successfully on both v2 and v3 boards, here is the schematic:


More info: http://www.lancos.com/prog.html

[mog123]

Yes, bootstrapping with the STK500/200 works. But you didn't program the Servo yet, you need to download the application.